Step 1 - If you are using a USB power adaptor to charge your KoreTrak Pro, you will first plug it into an available outlet. If you are charging the KoreTrak Pro on your computer, make sure the computer is fully charged or plugged in, meanwhile.
Step 2 - Remove your KoreTrak Pro watch from your wrist. Look at the backside of the smart watch where you’ll see “USB” and a small down-arrow symbol under it.
Step 3 - Under this arrow, twist the KoreTrak Pro wristband counter-clockwise while pulling it away from the KoreTrak watch screen. The KoreTrak watch wristband should pop off of the rest of the KoreTrak Pro, exposing 2 USB-A contact points.
Step 4 - Insert the smart watch USB-A into the USB port. Make sure that the contact points on the KoreTrak smartwatch match the USB adaptor or port in your computer.
Step 5 - When you plug in your KoreTrak fitness watch, you’ll hear and feel a vibration which confirms it is charging. You can also look at the KoreTrak Pro’s battery symbol; if the solid fill of the battery line is increasing, your KoreTrak Pro is charging successfully.
Step 6 - Keep your KoreTrak Pro plugged into the USB port for 1.5 to 2 hours for a full charge. Your KoreTrak Pro smartwatch can last up to seven full days on one full charge.
There is some additional information regarding waterproof, read the Is KoreTrak Pro waterproof? article.
If you are not enjoying KoreTrak Pro yet, take advantage of this Limited Time 50% Offer by clicking at the banner below.