KoreSurge comes packaged with the KoreSurge vibrating roller, Charging adapter, and instruction manual to assist with setup.
There is an LED battery light at the bottom of the KoreSurge control panel. This is the charging indicator. A fully lit, continuously shining light indicates KoreSurge vibrating foam roller is fully charged. When the LED light is dim or blinking, or the vibration level is decreased, KoreSurge likely needs a charge. Follow the steps below for instructions to charge your KoreSurge vibrating roller.
- Plug the KoreSurge charging cable into a power outlet and insert the micro-USB plug into the charging port on the KoreSurge control panel
- If the power switch is in the ON position, the LED battery indicator lights will light up to indicate the current charge level on the KoreSurge
- When the LED battery indicator light is completely lit up, the KoreSurge is fully charged
- When KoreSurge is fully charged, unplug the power adapter and remove the charging connector from KoreSurge
KoreSurge can hold a charge for up to 20 hours.
*Disclaimer: DO NOT use KoreSurge while it is charging.